Gold Member Since 2009
Audited Supplier
Chinasky Electronics Co., Limited

Tester Monitor, CCTV Tester, PTZ Control Tester manufacturer / supplier in China, offering 3.5 Inch CCTV Camera PTZ Control Poe Tester Monitor (CT2622), 1CH CCTV Passive HD-Cvi/Tvi/Ahd Video Balun with Power (VB213B&C), 4CH CCTV UTP Video Balun for HD-Ahd/Cvi/Tvi Camera (VB304AH) and so on.

(/ )

Supplier Homepage Product CCTV Tester Analogue Camera Tester 3.5 Inch CCTV Camera PTZ Control Poe Tester Monitor (CT2622)

3.5 Inch CCTV Camera PTZ Control Poe Tester Monitor (CT2622)

This product is currently unavailable, but you may contact the supplier directly, for further interest.
Basic Info
  • Model NO.: CT2622
  • Display: 3.5 Inch TFT-LCD ,480(RGB)X 320
  • Power Output: DC12V1a Power for Camera
  • Cable Scan: Search The Cable by The Audio Signal
  • Weight: 540g
  • Specification: CE, RoHS
  • HS Code: 903180
  • Signal Mode: NTSC/PAL (Auto Adapt)
  • PTZ Controller: Support RS232 and RS485
  • 10 X Zoom of Image: 10X Zoom Image Display and Video out
  • Size: 194mm X 112mm X 48mm
  • Trademark: Chinasky
  • Origin: China
Product Description
3.5 Inch CCTV Camera PTZ Control Poe Tester Monitor (CT2622)

The new CCTV tester is developed for the On-Site installation and maintenance of IP camera, analog camera and network device, with Video display, PTZ control, DC12v output power, Audio test, Color bar generator, RS 485 Data searching and Cable testing, which are the same to the previous models. The new developed functions include POE power supply testing, PING testing, IP address scan, Cable scan, Visual fault locator Video snapshot, Video record, Image magnification, Port flicker, LED lamp etc. The new tester also has built in TDR cable testing, which is specialized designed for BNC cable testing in the security monitoring system. This function can accurately measure BNC cable and network cable's break point and short-circuit location. The new tester designed with easy operation and portability makes it simple for a CCTV technician or installer to install and maintain CCTV systems, improving work efficiency by reducing time in the field.

1. Video signal testing
A. The new CCTV tester, built-in high definition 3.5"LCD-TFT 480(RGB)x320
B. Full-view display screen, easy and directly displays the camera image quality
C. Support PAL/NTSC
D. LCD screen brightness/Contrast/Color Saturation adjustable. Suitable for field construction and maintenance work

2. Video signal level test
Test video signal strength attenuation, longer video signal cable will cause the image to be dim, and reduce the image dynamic range, video signal is too strong, it will cause the virtual shadow, and reduce the sharpness of the image.
It also can real-display the video level value, if out of range, notices will be display in the screen.

3. PTZ controller
Display the input video images. Pan/tilt the P/T unit and zoom in/ out the image. Setup the controlling parameters like protocol, communication port, baud rate, PTZ ID, pan/tilt speed; Set and call preset position.

4. Enhanced Color bar generator
Video Generating, the PAL/NTSC multi-system color bar video generator (Eight-system switchable, transmit/receive eight-system colorful imagines). By receiving the video color bar to test the video channel whether transmit normally. And judge whether the color is different, because of the transmission loss or interference, it suitable for Video transmission of the field tests, such as optical video transmitter and receiver, video cable etc.
The new function color bar can test the image whether shift.
The color bar (red, green, blue, white, black) test the monitor whether have white or black dot etc.

5. DC12V 1A output power
Power the camera with DC12V (1A) power output from the tester. It is helpful for demo and testing when the power supply is not available.

6. Audio testing
Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.

7. Cable tester
Test LAN cable or telephone cable.
Connect LAN cable or telephone cable with the CCTV tester and cable tester. And then the connecting status, cable type and the sequence of wires will be displayed, as well as the serial number of the cable tester kit.

8. PTZ controller
Search the Control protocol code from Multifunction keyboard or DVR by RS485 /RS232 interface, test the PTZ control command data whether received anomaly and RS485/RS232 data transmission.

9. PTZ address scanning
Search up the ID of PTZ camera. Help the engineer search the speed dome address quickly.

10. Image magnification(10xZoom)
Set image 10x zoom, can view and display the details by 1x, 2x, 3x, 4x, 5x, 6x - 10X zoom in the monitor and tester.

11. Video snapshot
Capture the video image and save the current video frames as JPEG file

12. Video record
Send your message to this supplier
Ms. Sylvia Wang
Bd Manager
To: Ms. Sylvia Wang

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now